View previous topic :: View next topic |
Author |
Message |
mplaing
Joined: 03 Jan 2016 Posts: 13 Location: Canada
|
Link Posted: Mon Aug 26, 2019 4:10 pm Post subject: Placement of Electrical Units/Panels/components: |
|
|
This is my first post - I've been following this site for a long time and I finally got some stuff to start putting my eBrewery together.
I got a question or kind of looking for feedback before wires get installed by an electrician. I've put all my parts onto one board for simplicity and to make moving easier if I ever have to relocate.
Unfortunately the best location I can locate my system is near the electric breakers, but I am confident enough it is far enough not to get any liquid onto anything electrical.
Feedback/Input would be appreciated
_________________ mplaing
|
|
Back to top |
|
|
mplaing
Joined: 03 Jan 2016 Posts: 13 Location: Canada
|
Link Posted: Mon Aug 26, 2019 4:13 pm Post subject: Re: Placement of Electrical Units/Panels/components: |
|
|
mplaing wrote: | This is my first post - I've been following this site for a long time and I finally got some stuff to start putting my eBrewery together.
I got a question or kind of looking for feedback before wires get installed by an electrician. I've put all my parts onto one board for simplicity and to make moving easier if I ever have to relocate.
Unfortunately the best location I can locate my system is near the electric breakers, but I am confident enough it is far enough not to get any liquid onto anything electrical.
Feedback/Input would be appreciated |
Description: |
|
Filesize: |
183.8 KB |
Viewed: |
6615 Time(s) |
|
_________________ mplaing
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Aug 26, 2019 5:48 pm Post subject: |
|
|
Hi and welcome to the forum!
If you have concerns about water getting into places that it maybe should not, you should move things until you're ok with it. I don't think anyone can truly say "you'll be fine" given that they're not the ones brewing on your setup nor would they have any information about how and where your water source or kettles will be based on the information you've provided.
Given that your panel is not from us either it's probably best you ask them this question as well. (Our products are only available for purchase through this website and we do no build control panels for others - we are in no way related or affiliated to the company that you purchased from).
Cheers!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
|
|