Link Posted: Fri Aug 02, 2019 7:18 pm Post subject:
I have the 1 BBL + system from the electric brewery. But the DIY one so im not sure if maybe I messed something up or I didn't program the PID properly. The jumping I get is at all phases. whether its mashing or boiling now I know there are temperature fluctuations but its hard to gauge what tmp im at. Am I at 152 or 155 now its 151. I am using the thermo probes that are sold on your website as well. Ill have to recheck the FILT options and see if I did.
Joined: 12 Dec 2010 Posts: 10493 Location: Ottawa, Canada
Drinking: German Lager, Electric Creamsicle, London Pride, Kolsch, German Pils, Belgian Dubbel, Russian Imperial Stout, Black Butte Porter
Working on: Weizen, Belgian Quad, Belgian IPA
Link Posted: Sat Aug 03, 2019 12:57 pm Post subject:
rivetcatcher makes a good point. That could be it as well. Is it happening the same way with all 3 PIDs? If yes, itís most likely that the FILT setting is not set up. If it's correctly set and only one PID is affected, try swapping things around to see what the issue follows (temp probe tip, temp probe cable, or PID/inner control panel wiring). You can quickly do this by swapping temp probe XLR plugs on the bottom of the control panel and by disconnecting/reconnecting at the probe tip end. Let us know how you make out!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum