I ferment and carbonate with my spike CF15. I have been using their closed loop transfer setup, and have issues with foam. I transfer at around 35-36 degrees F.
I was recently told I could use a spunding valve on the Corny keg, and pressurize the corny and use the spunding valve some how to transfer and equalize/reduce the pressure to fill and avoid Co2 coming out of solution. I have searched for about an hour now, and can't find anything demonstrating this or any information pertaining to my specific setup.
Does anyone else do this and have any tips or a explanation so that when I keg my oatmeal stout this week I can use this method and avoid foam and loss of co2.
When I sample the beer from sample valve it tastes very good and carbonated to appropriate volumes, but when I pour a pint after transfer its under carbed and not the same. It takes a few days on gas to get back to where it was before transfer.
Joined: 27 Feb 2017 Posts: 212 Location: Dayton, OH
Drinking: FuP Helles Bock
Working on: TBD
Link Posted: Mon Apr 29, 2019 3:33 pm Post subject:
I use a variation of the method used by Short Circuited Brewer Brian with a scale. Link to YouTube below. I donít use a spunding valve for pressure transfers with my set up - no issues with foaming. My PRV on my kegs serve as overpressure protection.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum