|
|
|
|
|
View previous topic :: View next topic |
Author |
Message |
darkrabbit
Joined: 16 Jan 2019 Posts: 12 Location: Brampton, ON
|
Link Posted: Thu Jan 17, 2019 6:10 pm Post subject: No input for boil kettle.... just wondering why not |
|
|
Hi, after 6 long months I finally got the time in Dec and Jan to get the brewery done at least in basic format.
I had a question about the kettles... each one has an input for water or wort... except the boil kettle. Why not? I imagine there's a reason, and I just wanted to see why. Right now I have to drape the hose for wort output over the top of the kettle which seems... crude
Anyway, just something I noticed and wanted to check on.
Thanks!
-J
|
|
Back to top |
|
|
dp Brewing Company
Joined: 08 Jul 2013 Posts: 664 Location: Midwest
Drinking: Chocolate Taco, Raspberry Mango Cider, American X, Sandy Dunes
Working on: Nothing
|
Link Posted: Thu Jan 17, 2019 6:32 pm Post subject: |
|
|
I believe that is so you can check gravity while sparging. I added a whirlpool inlet on my kettle. I use that to fill up.
_________________ Visit dp Brewing Company
Hangovers hurt....but good memories last forever!
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
chastuck
Joined: 06 Oct 2013 Posts: 193 Location: Beckenham, Kent, UK
Drinking: Bitter
Working on: IPA
|
Link Posted: Thu Jan 17, 2019 9:11 pm Post subject: |
|
|
I must admit, I didn't like the idea of a dangling hose either - too easy for it to be pulled out and squirt hot wort everywhere. So I fitted a valve on the entry to my boiler. You can easily take wort samples from the kettle inlet tube and readily see how the flow is going.
I got the weldless kettle inlet from here:
https://store.brewpi.com/mashing/kettle-inlets-outlets/kettle-inlet-kit-barbed-npt
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
darkrabbit
Joined: 16 Jan 2019 Posts: 12 Location: Brampton, ON
|
Link Posted: Fri Jan 18, 2019 8:50 pm Post subject: |
|
|
chastuck wrote: | I must admit, I didn't like the idea of a dangling hose either - too easy for it to be pulled out and squirt hot wort everywhere. So I fitted a valve on the entry to my boiler. You can easily take wort samples from the kettle inlet tube and readily see how the flow is going.
I got the weldless kettle inlet from here:
https://store.brewpi.com/mashing/kettle-inlets-outlets/kettle-inlet-kit-barbed-npt |
Yeah this is likely gonna happen for me. I don't like the idea of draping hoses anymore now that I have this setup.
@Kal, thanks for the explanation, I knew there must be a reason Re: the disconnects, that was definitely the way to go. I did the 2 part as well, it makes a BIG difference. I tried one with 1 part and it's too hard to handle / not solid enough.
-J
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Forum powered by phpBB © phpBB Group
|
|