Return to TheElectricBrewery.com
  [ Shop ]   [ Building ]   [ Using ]   [ Recipes ]   [ Testimonials ]   [ Gallery ]   [ FAQ ]   [ About Us ]   [ Contact Us ]   [ Newsletter ]

Log inLog in   RegisterRegister   User Control PanelUser Control Panel   Private MessagesPrivate Messages   MembershipClub Memberships   SearchSearch   MemberlistMemberlist   Photo AlbumsPhoto Albums   Forum FAQForum FAQ


Cutting the enclosure

 
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> TheElectricBrewery.com Products
View previous topic :: View next topic  
Author Message
BierMeJohn



Joined: 16 Nov 2018
Posts: 2



PostLink    Posted: Fri Nov 16, 2018 3:31 pm    Post subject: Cutting the enclosure Reply with quote


        Register to remove this ad. It's free!
I bought the painted, not pre-punched enclosure because I am building a craftbeerpi system, but also using several switches and safeties of the Kal system.

My question is, in the step by step guide when you cut the holes in the panel, it looks like there is some white adhesive backed sheet that you were able to make marks on to line up where you needed to drill... What is this product? I need something I can stick on the door, top and bottom to make pencil marks on since the enclosure is black. I tried painters tape but that just started peeling off.

Thanks I'm advance!
Back to top
kal
Forum Administrator


Joined: 12 Dec 2010
Posts: 9990
Location: Ottawa, Canada

Drinking: German Lager, Electric Hop Candy Jr, Scottish 70/-, Cali Common, Maibock, Helles, Russian Imperial Stout, Black Butte Porter

Working on: Weizen


PostLink    Posted: Fri Nov 16, 2018 3:40 pm    Post subject: Reply with quote

Hi and welcome to the forum!

Can you point to where in the instructions you're seeing this white adhesive backed sheet? None was used so I'm not sure exactly what you are referring to.

The instructions to cut holes are here: http://www.theelectricbrewery.com/control-panel-part-1?page=6

Cheers!

Kal

_________________
Our new shop with over 150 new products: shop.TheElectricBrewery.com
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Back to top
View user's photo album (21 photos)
BierMeJohn



Joined: 16 Nov 2018
Posts: 2



PostLink    Posted: Fri Nov 16, 2018 4:06 pm    Post subject: Reply with quote

Apologies Kal! My memory deceived me.

Nonetheless, do you happen to have any suggestions for something I can do to make pencil marks visible? I, admittedly, have not tried to see whether I can see any pencil on the black paint.
Back to top
kal
Forum Administrator


Joined: 12 Dec 2010
Posts: 9990
Location: Ottawa, Canada

Drinking: German Lager, Electric Hop Candy Jr, Scottish 70/-, Cali Common, Maibock, Helles, Russian Imperial Stout, Black Butte Porter

Working on: Weizen


PostLink    Posted: Fri Nov 16, 2018 4:17 pm    Post subject: Reply with quote

I would use green (or blue) painters tape. Cover up the entire enclosure, and write on that. Not only will it make marking locations easier, it'll protect the finish when you cut/drill.

Kal

_________________
Our new shop with over 150 new products: shop.TheElectricBrewery.com
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Back to top
View user's photo album (21 photos)
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> TheElectricBrewery.com Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Support our site by purchasing through this link. We thank you!

Forum powered by phpBB © phpBB Group