kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Aug 15, 2017 8:06 pm Post subject: New lower price on pre-punched enclosure upgrade! |
|
|
New lower price on pre-punched enclosure/tapped heatsink upgrade
Save time and now save money! We've been able to renegotiate with our supplier and are now offering our pre-punched enclosure / pre-tapped heat sink control panel kit upgrade for only $50!
By far the most time consuming aspect of building your own control panel is punching the enclosure. Our professionally punched and powder coated enclosures come with a resilient matte charcoal finish ready for parts to be dropped in and wired up using our instructions.
Purchasing your parts directly from us has the following advantages:
- Save money: Our combined price is LOWER than purchasing the parts yourself and paying for shipping from over a dozen suppliers as we purchase in bulk.
- Save time: No need to order the hundreds of parts yourself from the various suppliers. Click once, pay once!
- Get the right parts: No risk of ordering the wrong part by mistake, no risk of the wrong part being sent by the supplier.
Parts that are guaranteed to work: We individually test every single part as they come in before they are included in our kits.
- Get better quality parts: Part quality can vary depending on the manufacturer. After years of trying different components to filter out the less desirable ones, we believe that the parts we supply are higher than average quality. Yes, these parts are more expensive but you get what you pay for.
- Custom enclosure with less work: Our kit enclosures are custom made for us and result in less work for you. There is no need to move the ground post, no need to seal and sand the bottom cable plate, and no need to prime and paint as the enclosure is already professionally powder coated with an industrial flat textured charcoal/black finish. Also available is an optional upgrade to have the enclosure door, top and bottom pre-punched along with the heat sink tapped. (The back plate is not drilled or tapped, allowing you to lay out your parts as you see fit).
Our Electric Brewery design is used in over 50 countries by homebrewers, commercial breweries, brew on premise shops, brew pubs, restaurants, industrial and entertainment corporations, distilleries, kombucha brewers, and more! Visit our Testimonials page for some examples.
To order a kit (or a pre-built panel): http://www.theelectricbrewery.com/control-panel
Cheers,
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|