View previous topic :: View next topic |
Author |
Message |
jeremy2027
Joined: 23 Apr 2016 Posts: 12 Location: Groves, TX
|
Link Posted: Thu Sep 08, 2016 1:11 pm Post subject: DIN Rail Breaker |
|
|
Im thinking about using a DIN rail breaker instead of the 7A 250V glass fuse to the hot buss. Any recommendations from people that have used one? Do I need to keep it at 7A 250V or can I use a 10A 125/250V like this:
http://amzn.to/2cFMHRf
Thanks
|
|
Back to top |
|
|
Ozarks Mountain Brew
Joined: 22 May 2013 Posts: 737 Location: The Ozark Mountains of Missouri
|
Link Posted: Thu Sep 08, 2016 7:24 pm Post subject: |
|
|
I run all 115v electronics including the 115v coil din relays through a 15 amp din breaker, it basically splits off one leg of a 240v breaker then goes through the 115v breaker then to a buss bar and all hot legs attach to that bus bar, its never tripped
_________________ "Imagination is more important than knowledge. Knowledge is limited. Imagination encircles the world."
|
|
Back to top |
|
|
|
|