View previous topic :: View next topic |
Author |
Message |
ukdaasfan
Joined: 16 Nov 2020 Posts: 15
|
Link Posted: Thu Feb 18, 2021 8:16 pm Post subject: INKBIRD PIDS |
|
|
So I managed to find manual but the settings but they are different from the ones in the setup guide.
Anyone know what the settings would be ?
Also have an INKBIRD E@B Timer with a reset button, but I press it and the alarm continues on.
This is all i need to do and I am finished.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Thu Feb 18, 2021 8:47 pm Post subject: |
|
|
The wiring instructions on our website are for the PID and timer models we use and recommend. If using different brands or models, the pinouts will be different. You'll need to compare the manuals for the ones we use/recommend with whatever models you wish to use.
Keep in mind that not all PIDs and timers will have the same function sets either, so not everything may work the same way. For example, some PIDs do not have alarm outputs so you would not be able to use that function of our control panel design.
The programming steps will also be different from one model to the next.
Good luck!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
ukdaasfan
Joined: 16 Nov 2020 Posts: 15
|
Link Posted: Thu Feb 18, 2021 8:53 pm Post subject: |
|
|
That I know
But I have managed to work out the pins outs for most of it. Just interested if anyone has done it before to save time.
|
|
Back to top |
|
|
|
|