|
|
|
![](http://www.TheElectricBrewery.com/images/spacer.gif) |
|
View previous topic :: View next topic |
Author |
Message |
Veritas
Joined: 15 Jan 2012 Posts: 15
|
Link Posted: Mon May 30, 2016 9:57 pm Post subject: |
|
|
I am enjoying a few pints of stout to celebrate Memorial Day here in the States... I brewed this about two and half months ago, and let me tell you; it is an incredibly smooth, malty, chocolaty, quenching brew! Nitro really does make a difference on this one. Cheers!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
hickster88
Joined: 23 Sep 2011 Posts: 51 Location: Elmhurst, Illinois
Drinking: 5 on tap at the moment
Working on: Mango milkshake IPA
|
Link Posted: Wed Aug 02, 2017 10:05 pm Post subject: Guinness recipe |
|
|
I tried this recipe about a month ago and I have just noticed I bought roasted 300l and not 500l. Beer is good but not quite where I wanted it to be. How much of a difference would you guess the 500 would have made?
Thanks, John
_________________ How You Feelin?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
hbohnet
Joined: 22 Sep 2013 Posts: 33 Location: Canmore, AB
|
Link Posted: Wed Sep 26, 2018 3:12 am Post subject: |
|
|
My first attempt at this recipe was disastrous due to stuck mash. I followed Kal's instructions, grinding the roasted barley in a burr grinder and stirring at end of mash rest. Within a few of minutes of restarting the pump the flow stopped and could not get it going no matter what I tried. I want to brew this again and trying to figure out what to do different. I have a couple of questions and looking for any advice others have.
I really stirred in the roasted barley the last brew, perhaps too much? Should the stirring take place at the top part of mash tun or stir right down to false bottom?
After stirring should the grain bed settle before starting pump?
I have never used them but would adding rice hulls help?
My brew system is a Kal clone with Blichmann 20 gal mash tun/false bottom. I have approx 25 brews using this setup and have never experienced a stuck mash. Appreciate any advice. Thanks!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
hbohnet
Joined: 22 Sep 2013 Posts: 33 Location: Canmore, AB
|
Link Posted: Wed Sep 26, 2018 3:46 pm Post subject: |
|
|
I use a 3 roller mill set to 0.050 to 0.055. I am going to try rice hulls and start with pump valve closed up to reduce flow for a while. I will post back my results as others seem to have similar issues. As always thanks for your help Kal!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
siestakey
Joined: 10 Mar 2017 Posts: 49
|
Link Posted: Mon Mar 11, 2019 3:22 pm Post subject: |
|
|
How is everyone doing water calculations for this? Are you hitting the water profile & pH with only the base malt and flaked barley in your calculations? I'm concerned with adding roasted barley and having the pH be off downstream in the process. I'm using RO water so there's no buffering capability.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Mar 11, 2019 3:33 pm Post subject: |
|
|
I add mine at the end of the mash. See the note in the recipe:
Quote: | Grind the roasted barley fine (I use a setting of 10) and add it after the 90 minute mash rest is complete. This avoids lowering the mash pH too far and reduces the chance of astringency which can occur from over-steeping highly roasted grains. Once the 90 minute mash is over, stop the mash pump, add the roasted barley, and give it a good stir to mix it into the existing grain bed. You need to stir well as otherwise the fine layer of powdery roasted barley on top may stop the flow. Start the mash pump again and continue with your mashout. The wort will be cloudy again but it will clear as the grain bed rises to mashout temperature over 20-30 minutes. |
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
siestakey
Joined: 10 Mar 2017 Posts: 49
|
Link Posted: Mon Mar 11, 2019 3:47 pm Post subject: |
|
|
sorry I should have been more clear in my question - if you target 5.3ish pH with the base malt and flaked barley for the duration of the mash and then add the roasted barley once the mash is complete, the pH of your runoff into the kettle should be considerably lower - are you doing any adjustments at that time to bring it back more in line?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Mar 11, 2019 4:02 pm Post subject: |
|
|
I don't, because I believe a lower pH is better than higher. But I suppose you could, to change the pH of the boil and the final product.
In the boil, a pH of 5.0 to 5.5 (measured at mash temperature) is common. If it is too high you may want to consider adding some 88% lactic acid to get it down into this range. A proper pH helps produce a good protein break during the boil which in turn helps with beer clarity and long term stability. A boil pH that is too high can also cause harsh hop bitterness.
Often, the pH of the final beer describes how “lively” a beer is too. An otherwise well-brewed beer can taste lackluster if the pH is too high.
Try it both ways and see which you prefer! (or if you notice a difference). Given that some will add lactic acid right to the beer at kegging time or even when pouring a pint (more info in my recipe), there are lots options available and no right or wrong answers.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
whistledown
Joined: 17 Jul 2018 Posts: 3 Location: Victoria Australia
|
Link Posted: Sat Mar 30, 2019 3:35 am Post subject: |
|
|
In the last few months I have brewed 250 litres of 5 different types of beer (4 from your recipe list) for my sons wedding. This Guinness clone was the first to go. Australians are not normally stout drinkers but this recipe hit the mark. It is the closest recipe to the original and will be one of my regulars from now on. I look forward to trying your more or your recipes, they are constantly very good. Thanks
_________________ I only drink beer when I am either alone or with someone.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Master
Joined: 30 Jan 2016 Posts: 171 Location: Virginia Beach, VA
Drinking: Naked Singularity Stout, Hurricane Bohemian Pilsner, Pineapple Cider, Ich bin ein Berlinerweiss, AbbyNormal Glutton Free Lambic
Working on: Vienna Lager. Witty name to follow.
|
Link Posted: Mon Sep 09, 2019 12:52 am Post subject: |
|
|
Kal,
Are you carbonating on straight CO2 then going to beer gas for serving, or is it on beer gas from initial packaging onward? If so how many volumes are you putting in?
Don't have beer gas at the moment, but I can stick my argon tank on it.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Sep 09, 2019 1:27 am Post subject: |
|
|
Master wrote: | Are you carbonating on straight CO2 then going to beer gas for serving, or is it on beer gas from initial packaging onward? If so how many volumes are you putting in? |
You can either way. It won't make a difference. To keep things simple I usually just go with straight beer gas right from the start. I just hook up the keg to the beer gas at serving pressure and wait. It takes longer this way but I'm not usually in a hurry, and the ~2-3 weeks help mellow out the beer anyway.
If you want to speed things up you could certainly pre-carb kegs using only CO2 (even done overnight at high pressure) and then push with a beer gas blend. How much you pre-carb isn't overly critical (within reason) as it'll mostly all get knocked out of solution as it goes through the stout faucet.
Cheers!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Master
Joined: 30 Jan 2016 Posts: 171 Location: Virginia Beach, VA
Drinking: Naked Singularity Stout, Hurricane Bohemian Pilsner, Pineapple Cider, Ich bin ein Berlinerweiss, AbbyNormal Glutton Free Lambic
Working on: Vienna Lager. Witty name to follow.
|
Link Posted: Thu Sep 19, 2019 6:06 pm Post subject: |
|
|
I brewed up a batch, adding the really dark stuff at the end of mash.
OG was right on target at 1.045. Mash profile was estimating 1.010 FG
Fermented down to 1.016 within 48 hours. At 1.015 now after a week. At that low of a drop in a week, it could be just a reading error.
I think the lack of attenuation might be the Patent and Roast going in once it's basically ramping to mashout.
Going on a 10 day vacation, and am debating the "keg as is" tomorrow, or let it sit for another 10 days and see what happens. Just won't be anyone home to check on the airlocks. Should be OK since we are done or almost done so I don't think the CO2 will evap the Starsan.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Thu Sep 19, 2019 6:29 pm Post subject: |
|
|
Master wrote: | I think the lack of attenuation might be the Patent and Roast going in once it's basically ramping to mashout. |
Why / how ? Adding that at the end of the mash is to avoid lowering the mash pH too far and reduces the chance of astringency which can occur from over-steeping highly roasted grains. A higher pH (more basic) produce does a sweeter beer due to a less fermentable wort and more body, but the concern is that the amount of highly kilned malt we add may take it a bit too low. You should still get a well fermentable wort either way. The recipe goes from 1.044 to 1.011 to make a 4.2% ABV beer. You're at 1.045 starting so you should come out around 1.012 or so. I'd wait longer. No harm.
Quote: | Going on a 10 day vacation, and am debating the "keg as is" tomorrow, or let it sit for another 10 days and see what happens. |
I would let it sit near room temp and wait. The gravity's likely to drop a few more points.
Quote: | Just won't be anyone home to check on the airlocks. Should be OK since we are done or almost done so I don't think the CO2 will evap the Starsan. |
Should be ok. Use an airlock with a lid on it like either of these 2 and you can go week and weeks:
https://shop.theelectricbrewery.com/pages/3-piece-airlock
https://shop.theelectricbrewery.com/pages/s-shaped-airlock
I don't think I've ever had to re-filled one in the ~30 years I've been brewing. Then again, I've always just use regular tap water.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Master
Joined: 30 Jan 2016 Posts: 171 Location: Virginia Beach, VA
Drinking: Naked Singularity Stout, Hurricane Bohemian Pilsner, Pineapple Cider, Ich bin ein Berlinerweiss, AbbyNormal Glutton Free Lambic
Working on: Vienna Lager. Witty name to follow.
|
Link Posted: Thu Sep 19, 2019 9:02 pm Post subject: |
|
|
I've brewed a very similar one in the past, but didn't do the late mash addition. Just gonna let it sit. It's a temp controlled conical at 67F, so I'm not worried about temperature fluctuations.
Just dropped off my N2 tank to be refilled as a 75/25 Beer Gas mix tank.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Master
Joined: 30 Jan 2016 Posts: 171 Location: Virginia Beach, VA
Drinking: Naked Singularity Stout, Hurricane Bohemian Pilsner, Pineapple Cider, Ich bin ein Berlinerweiss, AbbyNormal Glutton Free Lambic
Working on: Vienna Lager. Witty name to follow.
|
Link Posted: Thu Sep 19, 2019 9:05 pm Post subject: |
|
|
I've had airlocks go dry, but that was probably due to being gone for two and a half months and the other consumer of my beer and cider not filling it up (but the cider airlocks did get filled)
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Forum powered by phpBB © phpBB Group
|
|