View previous topic :: View next topic |
Author |
Message |
k3v1np
Joined: 16 May 2013 Posts: 8 Location: Regina, Saskatchewan Canada
|
Link Posted: Tue Sep 24, 2013 9:27 pm Post subject: Beersmith Profile |
|
|
I've just built my electric brewery with 3 x 20G boilermaker kettles, does anyone have a similar setup and using Beersmith 2.0? I looking for some guidance on setting up my equipment profile.
_________________ If you can make an honest brew, you don't need any friends.
|
|
Back to top |
|
|
Fejj
Joined: 10 Jun 2013 Posts: 213 Location: North Shore, MA
|
Link Posted: Sun Sep 29, 2013 2:26 pm Post subject: |
|
|
Hey Man,
While im just starting the process of building my system i know the guys over at beersmith are most helpful and if you give them the specs of the EB system im sure they can give you a hand on setting your software correctly. They are most helpful.
Jeff
|
|
Back to top |
|
|
BOWIEJUNK
Joined: 03 Jan 2015 Posts: 5
|
Link Posted: Sat Jan 03, 2015 2:24 am Post subject: |
|
|
Any luck with getting that help from the BEERSMITH crew? Im starting up with a ONE BARREL E.B. rig and am in the same boat!!!
_________________ The mind is an embodied process that regulates the flow of energy and information. Deepak Chopra
|
|
Back to top |
|
|
Fejj
Joined: 10 Jun 2013 Posts: 213 Location: North Shore, MA
|
Link Posted: Sun Jan 04, 2015 4:02 pm Post subject: |
|
|
BS has since added default profiles for Blichmann g1(unsure about g2 or if there is a difference) pots for 3 vessel systems. In my experience they are a tad off. id recommend calibrating your boiloff yourself as every elevation and region while have difference. Dead space etc should be right but imo you should be aiming to harvest all that but you need to use your own judgement. In the end you need to brew on your system and tweek your profile to your brew style, someone cant do it for you:)
Cheers,
Jeff
|
|
Back to top |
|
|
|
|