View previous topic :: View next topic |
Author |
Message |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Tue Jul 03, 2018 12:59 pm Post subject: |
|
|
did a west coast ipa on sunday, 10.5 oz of hops in the kettle. performed flawlessly.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
ihomebrewsolutions
Joined: 09 Apr 2015 Posts: 19 Location: Knoxville, TN
|
Link Posted: Wed Jul 04, 2018 1:26 pm Post subject: |
|
|
TJewell wrote: | Anybody running the 2.0XL with an 1/8th hp pump? |
That is a pretty large pump. You will need to monitor your flow rate and make sure you aren't pulling wort through the screen too quickly. High flow rates can pull negative pressure inside the screen cavity and cause the screen to collapse. i normally recommend about 1 GPM or less. Since you are using the larger screen, you might be able to go a little quicker but you will need to keep and eye on it.
_________________ Innovative Homebrew Solutions
Home of the Hop Stopper 2.0!
http://www.theelectricbrewery.com/hop-stopper
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
NcBrew
Joined: 10 Feb 2018 Posts: 2 Location: North Carolina
|
Link Posted: Fri Jul 06, 2018 11:46 am Post subject: Modified Diptube |
|
|
Has anyone modified their dip tube from a SS Brewtech kettle to make it work with the hop stopper? If so could you post a picture of it. Thanks
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Fri Jul 06, 2018 1:04 pm Post subject: Re: Modified Diptube |
|
|
NcBrew wrote: | Has anyone modified their dip tube from a SS Brewtech kettle to make it work with the hop stopper? If so could you post a picture of it. Thanks |
Hi! I don't have any pictures myself but it's straight forward. Here's the SS Brewtech dip tube before:
That trub dam has to be removed and then smooth (file/sand) the surface of the tube to fit into the sealing grommet on the Hop Stopper, and then notch the end of the tube at 45 degrees to assure wort flow at all times. (There are picture of this notching in the user manual: http://www.theelectricbrewery.com/images/Hop%20Stopper%202.0%20Users%20Guide.pdf
Once completed the dip tube will look exactly like a regular Hop Stopper dip tube like so:
The modifications are not difficult, but do require a bit of care. If you prefer you may send us your dip tube and we will modify it at no cost. We will then return it with the Hop Stopper for your kettle. Contact us if interested at IHomeBrewSolutions@TheElectricBrewery.com. If you choose to modify the dip tube yourself, then simply order the standard Hop Stopper 2.0 screen only.
Cheers!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
NcBrew
Joined: 10 Feb 2018 Posts: 2 Location: North Carolina
|
Link Posted: Fri Jul 06, 2018 8:05 pm Post subject: Re: Modified Diptube |
|
|
kal wrote: | NcBrew wrote: | Has anyone modified their dip tube from a SS Brewtech kettle to make it work with the hop stopper? If so could you post a picture of it. Thanks |
Hi! I don't have any pictures myself but it's straight forward. Here's the SS Brewtech dip tube before:
That trub dam has to be removed and then smooth (file/sand) the surface of the tube to fit into the sealing grommet on the Hop Stopper, and then notch the end of the tube at 45 degrees to assure wort flow at all times. (There are picture of this notching in the user manual: http://www.theelectricbrewery.com/images/Hop%20Stopper%202.0%20Users%20Guide.pdf
Once completed the dip tube will look exactly like a regular Hop Stopper dip tube like so:
The modifications are not difficult, but do require a bit of care. If you prefer you may send us your dip tube and we will modify it at no cost. We will then return it with the Hop Stopper for your kettle. Contact us if interested at IHomeBrewSolutions@TheElectricBrewery.com. If you choose to modify the dip tube yourself, then simply order the standard Hop Stopper 2.0 screen only.
Cheers!
Kal |
Thanks for the reply. Looking forward to putting this into use.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
deemo
Joined: 30 Nov 2014 Posts: 23 Location: Canada
|
Link Posted: Tue Jul 10, 2018 5:44 pm Post subject: |
|
|
If instead of a notch my diptube simply is 1/4inch from the bottom of the kettle will it function?
ihomebrewsolutions wrote: | Everything is all stainless steel (except for the grommet which is FDA silicone) and the dip tube is custom made to each individual kettle. If you make your own dip tube, make sure it reaches to the center of the converted keg bottom and comes very close to the bottom surface for maximum draining. Also, the dip tube needs a notch on the tip to assure that wort can always flow into the dip tube. Download the User's Guide on the Hop Stopper order page and check the bottom of Page 2.
Prosit!
Dennis Collins
Innovative Homebrew Solutions |
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Jul 10, 2018 7:14 pm Post subject: |
|
|
No - you need a notch to ensure that the screen doesn’t get pressed against the dip tube, which would effectively reduce the filtering area from the massive Hop Stopper surface area down to a tiny ~1/2” circle the size of the dip tube. The notch ensures that fluid flows through the entire Hop Stopper mesh.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
deemo
Joined: 30 Nov 2014 Posts: 23 Location: Canada
|
Link Posted: Tue Jul 10, 2018 7:18 pm Post subject: |
|
|
This makes a lot of sense.
kal wrote: | No - you need a notch to ensure that the screen doesn’t get pressed against the dip tube, which would effectively reduce the filtering area from the massive Hop Stopper surface area down to a tiny ~1/2” circle the size of the dip tube. The notch ensures that fluid flows through the entire Hop Stopper mesh.
Kal |
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
hondor06
Joined: 28 Jan 2018 Posts: 1
|
Link Posted: Fri Jul 20, 2018 6:30 pm Post subject: |
|
|
Any ideas how to get leaf hops and small particulate out from inside? Furthermore any ideas why this would happen?
Th
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
deemo
Joined: 30 Nov 2014 Posts: 23 Location: Canada
|
Link Posted: Fri Jul 20, 2018 6:33 pm Post subject: |
|
|
hondor06 wrote: | Any ideas how to get leaf hops and small particulate out from inside? Furthermore any ideas why this would happen?
Th |
Maybe the silicone grommet isn't the right size for your diptube? Try soaking the screen in PBW then rinsing with a high pressure hose.
D
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Fri Jul 20, 2018 7:11 pm Post subject: |
|
|
hondor06 wrote: | Any ideas how to get leaf hops and small particulate out from inside? Furthermore any ideas why this would happen?
Th |
High pressure from a hose, like with your thump over the end. A quick 30 second spray with a hose is all it takes. Then allow the Hop Stopper to air dry. See the second video here: https://www.instagram.com/p/BjA1KQ-hCPG/?taken-by=theelectricbrewery
It's important to remember that having a few bits and pieces inside isn't going to many any difference. This is the boil kettle. No need to aim to 100% removal of every last little bit. You should be able to get 99% out in 30-60 seconds of spraying.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Mon Jul 23, 2018 2:35 pm Post subject: |
|
|
used this again yesterday, 4.5 oz hops in a porter. hop/break residue was caked/hardened to the hopstopper and the bottom of the kettle after draining. and i don't mean in a bad way, more like 'all the liquid has been sucked out and there is nothing left'!
i've actually reduced batch volumes by a half gallon or so because of how efficient it is at grabbing all the liquid. after kegging the first couple brews, i was all 'wtf, how come i have so much beer left over?'
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ozarks Mountain Brew
Joined: 22 May 2013 Posts: 737 Location: The Ozark Mountains of Missouri
|
Link Posted: Mon Jul 23, 2018 9:26 pm Post subject: |
|
|
I wish I had room for it, my element is only 2.25" off the bottom
_________________ "Imagination is more important than knowledge. Knowledge is limited. Imagination encircles the world."
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Jul 23, 2018 9:29 pm Post subject: |
|
|
Ozarks Mountain Brew wrote: | I wish I had room for it, my element is only 2.25" off the bottom |
What's the kettle diameter? Got any pictures of what's inside the kettle? It will likely fit as the standard sized Hop Stopper is only 9.75" in diameter and 2" high.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ozarks Mountain Brew
Joined: 22 May 2013 Posts: 737 Location: The Ozark Mountains of Missouri
|
Link Posted: Mon Jul 23, 2018 9:33 pm Post subject: |
|
|
20" and so far I went with a custom hop ring, works to a degree but still leaves wort
Description: |
|
Filesize: |
227.05 KB |
Viewed: |
19085 Time(s) |
![WP_20180507_19_44_29_Pro.jpg](files/wp_20180507_19_44_29_pro_142.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ozarks Mountain Brew
Joined: 22 May 2013 Posts: 737 Location: The Ozark Mountains of Missouri
|
Link Posted: Mon Jul 23, 2018 9:36 pm Post subject: |
|
|
I think I'm going to try skinning that ring with some fine stainless material
_________________ "Imagination is more important than knowledge. Knowledge is limited. Imagination encircles the world."
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Jul 23, 2018 9:38 pm Post subject: |
|
|
Your kettle is definitely big enough to fit a standard sized (2") high hop stopper under the element that is 2.25" from the bottom.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ozarks Mountain Brew
Joined: 22 May 2013 Posts: 737 Location: The Ozark Mountains of Missouri
|
Link Posted: Mon Jul 23, 2018 9:40 pm Post subject: |
|
|
I've had one before and it kept getting clogged, I guess the issue is I whirlpool for 30 minutes, can't do that with a hop screen
_________________ "Imagination is more important than knowledge. Knowledge is limited. Imagination encircles the world."
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|