Converting existing keggle system to electric. On the boil keggle I have a 1/2 NPT tee with a dial thermometer and sightglass. I want to replace dial thermometer with a RTD temp probe. I was wondering if a 2" probe would function properly or if I should use a longer probe like the 2.36 Tri-Clover probe, or use a larger probe (I found a 6" probe online)? The tee is approximately 2" in length. Thanks in advance for any suggestions.
Joined: 21 Oct 2015 Posts: 4 Location: South Jersey
Link Posted: Thu Oct 22, 2015 1:24 am Post subject:
Between tee, coupling, & nipple I think I'm going to need 100mm probe. Don't want to drill and weld another spud--just finished reassembling and polishing the keggle, (weldless not for me). I found a 100mm to 1/2 npt probe online and a soution using a 1/2 npt thermo probe compression fitting. Thanks anyway.
Joined: 12 Dec 2010 Posts: 10540 Location: Ottawa, Canada
Drinking: German Lager, Electric Creamsicle, London Pride, Kolsch, German Pils, Belgian Dubbel, Russian Imperial Stout, Black Butte Porter
Working on: Weizen, Belgian Quad, Belgian IPA
Link Posted: Thu Oct 22, 2015 4:25 am Post subject:
just finished reassembling and polishing the keggle, (weldless not for me)
Don't discount weldless.
Most people assume weldless is "bad" because of misinformation.
What most don't realize is that there are tens of thousand of Blichmann kettles in use out there (for 10+ years now) and all are weldless. When you buy a stock Blichmann kettle the sight glass, temp dial, and ball valve all are weldless. They are perfectly sealed and never require maintenance.
We apply this same principle in order to attach extra fittings to the kettles for our design/setup.
There are hundreds of commercial breweries using this setup with Blichmann kettles as their main brewing setup or as a pilot setup. Some brewing 2-3 times/day for years. Some others (such as Brooklyn Brewery) use the setup as a pilot system. None of these places have ever had any issues with the weldless fittings that Blichmann uses for the ball valves / sight glass / thermometer or the weldless fittings that I show people how to attach per my instructions.
Most Blichmann owners don’t even know they’re weldless as the fittings are tight metal on metal, no different than welded. They never need to be taken apart for cleaning.
There's a stigma that weldless means "bad" but it's not true when done correctly. There have been lots of "bad" weldless implementations in the past that have not helped unfortunately.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum