Electric Brewery Control Panel

jgalak · Joined: 06 Jun 2015 Posts: 19

Thanks!

**kal** · Posted: Fri Aug 21, 2015 2:35 pm Post subject:

wscottcross · Posted: Fri Sep 11, 2015 1:48 pm Post subject:

I already have most of the internal components now in my prototype, but now I want to put it into a nice enclosure instead of my hacked up prototype. Can I purchase just the pre-punched enclosure without buying the whole kit?

**kal** · Posted: Fri Sep 11, 2015 1:59 pm Post subject:

I'm afraid that's not an option we offer at the moment. One of the reasons being that the receptacles on the bottom can vary slightly based on manufacturer (as do the screw hole locations for these receptacles) so selling just the enclosure separately is difficult.

Kal

wscottcross · Posted: Fri Sep 11, 2015 2:25 pm Post subject:

Understood. Thanks.

snowtiger87

The outside with the semi-rough paint. I got mine from Spike Innovations. Everything I have used so far has left a residue; the blue cleaning pads, paper towels, and cotton cloths.

What do you use?

RangerBrewer · Joined: 23 Mar 2016 Posts: 21 Location: earth

Can the labels be ordered independently/separately? I don't need all of them, but a few specific ones of them would be nice ;>)

**kal** · Posted: Fri Aug 19, 2016 12:38 pm Post subject:

Email us at sales@TheElectricBrewery.com with what you need and we'll see if it can be accommodated.

Kal

hairy camel · Joined: 02 Sep 2016 Posts: 1 Location: brisbane

hi kal just wondering do you post to Australia at all?

**kal** · Posted: Sat Sep 03, 2016 10:01 pm Post subject:

**kal** · Posted: Tue Aug 15, 2017 9:44 pm Post subject:

New lower price on our pre-punched enclosure/tapped heat sink kit upgrade: Now only $50!

All thumbs but still want to assemble one of our control panel kits yourself? Pre-punched enclosures and tapped heat sinks are available as many of you enjoy building your own, but would prefer not to undertake the drilling and cutting of the control panel enclosure. This optional upgrade allows you to save time and helps ensure an exacting fit and finish with perfectly aligned controls and lights. Our professionally punched and powder coated enclosures come with a resilient matte charcoal finish ready for parts to be dropped in and wired up using our instructions. After years of trying different components to filter out the less desirable ones, our control panel kits include higher than average quality components, many US sourced. Yes, these parts are more expensive but you get what you pay for.

Kal

Master · Posted: Wed Aug 16, 2017 1:18 am Post subject:

The upgrade costs way less than what just the dies would cost you. I have a full metal fab shop and I'd pay the $50.

**kal** · Posted: Wed Aug 16, 2017 2:01 am Post subject:

Thanks Master! (I need to install a "Like" button). Wink

Kal

loki28 · Joined: 22 Nov 2022 Posts: 1 Location: Sudbury,ON Canada

How much does the 30A kit weight?

**kal** · Posted: Tue Nov 22, 2022 6:05 pm Post subject: Re: 30A kit weight