View previous topic :: View next topic |
Author |
Message |
aminniti147
Joined: 19 Feb 2022 Posts: 1
|
Link Posted: Sat Feb 19, 2022 11:20 pm Post subject: Wiring InkBird 106-HV |
|
|
I am having trouble wiring my inkbird PID, and cross referencing terminals since I have 11 and 12 and the ones used in the kit are 13 and 14. These have 1 alarm not two. Curious as so which would get the parallel connection and what terminal would get the connection from the manual switch.
Description: |
|
Filesize: |
69.22 KB |
Viewed: |
3745 Time(s) |
|
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Feb 22, 2022 1:59 pm Post subject: |
|
|
Hi! If the PID you use has different or less functionality (like only 1 alarm instead of 2) from the ones we use/recommend in our guides you'll need to decide how you want to redesign to accommodate this. Completely up to you really, depending on what you deem important.
From the diagram you posted it looks like this PID also only supports 2-wire TC style temperature probes instead of more accurate 3-wire RTD style. So keep that in mind too - you'll need to use different temperature probes and wire differently.
Good luck!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
kwilson16
Joined: 09 May 2017 Posts: 17
|
Link Posted: Tue Feb 28, 2023 7:43 pm Post subject: Here is how I did it |
|
|
My method:
Description: |
|
Filesize: |
108.76 KB |
Viewed: |
1631 Time(s) |
|
Description: |
|
Filesize: |
120.84 KB |
Viewed: |
1631 Time(s) |
|
|
|
Back to top |
|
|
|
|