View previous topic :: View next topic |
Author |
Message |
Mach7900
Joined: 28 Dec 2020 Posts: 3
|
Link Posted: Tue Dec 29, 2020 1:27 pm Post subject: Heating Element Question |
|
|
Currently have a heating element attached to Boil kettle using a weldless 1.5" TC triclamp. The setup has worked fine with the exception of the small space inside the weldless clamp and heating element which collects hop particles. It can be difficult to clean that small area. When we were researching our e-brew design, I remember seeing a heating element which had the same weldless TC clamp which had either silicone or epoxy filling the space. Cannot find that since...
Question, can anyone suggest a food grade high temperature silicone or epoxy they have used for this purpose? Any and all comments suggestions welcomed-thanks
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
Mach7900
Joined: 28 Dec 2020 Posts: 3
|
Link Posted: Tue Dec 29, 2020 11:36 pm Post subject: Element w Pics |
|
|
Appreciate the response. I should have attached a picture for clarification. I am attaching a picture now.
I understand & agree why people use the weldless TC option. I have been brewing on our setup for over a year now. I really like and prefer the TC clamp b/c it's so easy to remove and clean. The problem is the small space in the picture where material collects. It is a small space which is difficult to get a wire brush or wash cloth into to remove the debris. I have seen the same element with a filler to keep material from collecting in this area.
Description: |
|
Filesize: |
109.44 KB |
Viewed: |
6945 Time(s) |
|
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Thu Dec 31, 2020 3:19 am Post subject: |
|
|
Just as a suggestion, since I went with all tri clover connections in my build, I had a 2 inch heating element kinda like the one you show in the picture. I use keggles and I like to hose and scrub everything out after the brew day is finished. I didn't like dragging the cord that was connected and I wanted something removable and easy.
I changed out the element like the one you show and I went with a tri clover heating element that has plug prongs on the end. I like this so much better for my rig. After brewing I unplug the heating element cord from the boil kettle and I remove the clamp and take out the heating element. I scrub the heating element in the sink and then I use a piece of weed wacker string shaped like a U and I run that back and forth over the heating element under the faucet, and it gets the heating element very clean.
The large 2 inch opening in the kettle (now that the heating element is removed) is also a bonus when I rinse out the boil kettle. Everything runs out that hole when you tip it on it's side, and it makes cleaning the kettle very easy. Just something to think about as this is what works for me.
Good Luck,
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
|
Mach7900
Joined: 28 Dec 2020 Posts: 3
|
Link Posted: Sun Jan 10, 2021 1:02 am Post subject: |
|
|
Thanks for the replies. I have made a couple changes to the setup- basically a hybrid of the suggestions posted here.
|
|
Back to top |
|
|
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Sun Jan 10, 2021 1:08 am Post subject: |
|
|
Excellent, hope it works out for you!
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
dp Brewing Company
Joined: 08 Jul 2013 Posts: 664 Location: Midwest
Drinking: Chocolate Taco, Raspberry Mango Cider, American X, Sandy Dunes
Working on: Nothing
|
Link Posted: Thu Jan 14, 2021 4:10 pm Post subject: |
|
|
I have the same tri-clamp setup. I just blast the opening with garden hose nozzle. It seems to work petty good. I also have a small faucet brush that I use in there. I prefer the tri-clamp setup so I can remove the element and use my BK outside on gas burner when we do a group brew.
_________________ Visit dp Brewing Company
Hangovers hurt....but good memories last forever!
|
|
Back to top |
|
|
|
|