View previous topic :: View next topic |
Author |
Message |
Spike Innovations TheElectricBrewery.com manufacturer
Joined: 26 Feb 2011 Posts: 245 Location: ME
Working on: Your Brewery!
|
Link Posted: Sun Oct 08, 2017 4:34 pm Post subject: Fully Equipped 10 Gallon Blichmann V1 Brew Pots for Sale |
|
|
LOWERED TO $1,000 OBO
Hey everyone-
I am finally getting around to cleaning up and offering for sale my old 10 gallon Blichmann System (3-5 gallons finished product). This was my original system back when I started building panels and I have since upgraded to 20 gallon kettles as I was blowing through beer way too fast! This sale includes all three kettles fully equipped and ready to brew, does not include pumps, control panel, and ancillary accessories.
I want to mention that I will include a brand new element/boxe/cord for the boil kettle, your choice of wattage and style.
Please see below for details. Any other questions do not hesitate to ask.
Notes about the system:
Typical post Boil product volume: 5.25 gallons
Converted from Hop Stopper to integrated Whirlpool arm and factory pickup valve for BK (can include Hop Stopper with purchase if requested)
Brewed over 50 batches on this system
BK
-Stock Blichmann V1 10 gallon pot
-Thermometer replaced with Whirlpool fitting and ball valve
-No Metric probe installed, but can install one
-Will include new heating element assembly, your choice of wattage and style
MLT
-Stock Blichmann V1 10 gallon pot with False Bottom
-Standard configuration to Kal's Specs
HLT
-Stock Blichmann V1 10 gallon pot
-small TEB HERMS coil
-Will include new heating element assembly, your choice of wattage and style for the boil kettle. HLT includes 5500W Straight element
Total cost brand new: ~ $2,000
For sale for: $1,000 OBO
Shipping not included, ships from Maine, USA
_________________ Official manufacturer for TheElectricBrewery.com. Click here to order our products!
Last edited by Spike Innovations on Wed Aug 29, 2018 2:48 pm; edited 2 times in total
|
|
Back to top |
|
|
Spike Innovations TheElectricBrewery.com manufacturer
Joined: 26 Feb 2011 Posts: 245 Location: ME
Working on: Your Brewery!
|
|
Back to top |
|
|
scottseabs
Joined: 13 Nov 2017 Posts: 2
|
Link Posted: Mon Nov 13, 2017 10:00 pm Post subject: |
|
|
Hello, I have a few questions about your kettles:
1) are they still available?
2) if so, i see a hole at that bottom of the boil kettle. is this where the old element was?
3) do you have the female QD's for the male NPT?
4) do you have any suggestions on figuring shipping costs?
Thanks,
Scott
|
|
Back to top |
|
|
Spike Innovations TheElectricBrewery.com manufacturer
Joined: 26 Feb 2011 Posts: 245 Location: ME
Working on: Your Brewery!
|
Link Posted: Wed Nov 15, 2017 7:10 pm Post subject: |
|
|
scottseabs wrote: | Hello, I have a few questions about your kettles:
1) are they still available?
2) if so, i see a hole at that bottom of the boil kettle. is this where the old element was?
3) do you have the female QD's for the male NPT?
4) do you have any suggestions on figuring shipping costs?
Thanks,
Scott |
Scott-
1. They are still available.
2. The hole in the boil kettle is for the element. New elements will be provided as suggested in the post.
3. I do have female QD's here and can include them for an additional cost
4. Let me know your zip code and residential or commercial address and I can get a shipping quote.
Thanks!
Mike
_________________ Official manufacturer for TheElectricBrewery.com. Click here to order our products!
|
|
Back to top |
|
|
scottseabs
Joined: 13 Nov 2017 Posts: 2
|
Link Posted: Fri Nov 17, 2017 4:09 pm Post subject: |
|
|
Sounds good, thanks. I'll PM you the address.
|
|
Back to top |
|
|
DavidWalker
Joined: 22 Nov 2017 Posts: 2
|
Link Posted: Thu Nov 23, 2017 10:19 pm Post subject: |
|
|
I'm interested in this setup if it is still available. Could you let me know if it is still for sale?
|
|
Back to top |
|
|
Spike Innovations TheElectricBrewery.com manufacturer
Joined: 26 Feb 2011 Posts: 245 Location: ME
Working on: Your Brewery!
|
Link Posted: Mon Nov 27, 2017 10:33 pm Post subject: |
|
|
DavidWalker wrote: | I'm interested in this setup if it is still available. Could you let me know if it is still for sale? |
Hi David-
We had one person interested in the setup and I am checking with them to see if they are still interested. I will let you know if it is still for sale as soon as I have heard from them.
Thanks,
Mike
_________________ Official manufacturer for TheElectricBrewery.com. Click here to order our products!
|
|
Back to top |
|
|
Spike Innovations TheElectricBrewery.com manufacturer
Joined: 26 Feb 2011 Posts: 245 Location: ME
Working on: Your Brewery!
|
|
Back to top |
|
|
DavidWalker
Joined: 22 Nov 2017 Posts: 2
|
Link Posted: Tue Sep 04, 2018 10:57 pm Post subject: |
|
|
Hey Mike,
I'm still interested in these. I sent you a private message.
David
|
|
Back to top |
|
|
|
|