Return to TheElectricBrewery.com
  [ Shop ]   [ Building ]   [ Using ]   [ Recipes ]   [ Testimonials ]   [ Gallery ]   [ FAQ ]   [ About Us ]   [ Contact Us ]   [ Newsletter ]

Log inLog in   RegisterRegister   User Control PanelUser Control Panel   Private MessagesPrivate Messages   MembershipClub Memberships   SearchSearch   MemberlistMemberlist   Photo AlbumsPhoto Albums   Forum FAQForum FAQ


10 Gallon Electric Brewery System

 
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Buy & Sell
View previous topic :: View next topic  
Author Message
loresonde




Joined: 22 Feb 2017
Posts: 7



PostLink    Posted: Wed Aug 16, 2017 11:38 am    Post subject: 10 Gallon Electric Brewery System Reply with quote


        Register to remove this ad. It's free!
Charlotte, NC

Only used this twice after building it in February. I haven't lost interested in brewing, I'm looking to sell because this amount is just to much for me to drink. Below is a FULL breakdown of everything, but here are some quick notes. There is a lot to list, if i miss something or you have any question feel free to contact me. Everything was bought NEW and has 2 uses on it.

$2,800 + shipping (for an idea on shipping, to Seattle is 400$)

The whole setup is semi-permanently mounted to the stand. Stand can go with the system or I can keep it, price does not change. The system is currently as is in the pictures and fully operational. No leaks, problems, scratches. For anyone picking up I would be happy to show the system working.


  • (3) - 10 Gallon Anvil kettles, all fittings soldered on however the bottom fittings are weldless and come like that from Anvil.
  • Stainless Steel Heating Elements
  • 30A 240V Control panel
  • (2) Chugger Pumps
  • Hoses (2) 3ft and (3) 5ft


This is going to get wordy,

HLT
1 10 gallon Anvil Brew Kettle w/ dip tube
1 8" Coil with 2 bends 50' x 3/8" x .035 OD Tubing 304/304L
2 Pull Through Solderable 1/2" Compression
2 Stainless Ball Valve - 1/2" FPT Full Port
2 1/2" SS Camlock F style fitting Quick Disconnect
1 Stainless Ball Valve - 1/2" FPT Full Port
1 Pull Through 1/2" bulkhead with integrated diptube
1 Closed nipple threaded 1/2"*NPT x 1"
1 Stainless steel "T" 1/2" FPT
2 1/2" SS Camlock F style fitting Quick Disconnect
1 Liquid tight RTD sensor, 1.5 inch, 1/2 NPT Thread
1 Camco 02955 4500W 240V Screw-In Water Heater Element - Ultra Low Watt Density
1 Hot Pod Kettle Element Enclosure ETC4S - TC1.5" Enclosure w/clamp, gasket, and 1.5" TC Radiused Solder Flange

MLT
1 10 gallon Anvil Brew Kettle w/ dip tube
1 Anvil 10 gallon False Bottom
1 Elbow 1/2" NPT to 1/2" Barb
1 Stainless Ball Valve - 1/2" FPT Full Port
1 Pull Through 1/2" bulkhead
2 Closed nipple threaded 1/2"*NPT x 1"*
1 Stainless steel "T" 1/2" FPT
2 1/2" SS Camlock F style fitting Quick Disconnect
1 Liquid tight RTD sensor, 1.5 inch, 1/2 NPT Thread


Boil Kettle
1 10 gallon Anvil Brew Kettle w/ dip tube
1 Hop Stopper BK30
1 1/2" SS Camlock F style fitting Quick Disconnect
1 Liquid tight RTD sensor, 2.5 inch, M14 Thread
1 Camco 02955 4500W 240V Stainless - Ultra Low Watt Density
1 Hot Pod Kettle Element Enclosure ETC4S - TC1.5" Enclosure w/clamp, gasket, and 1.5" TC Radiused Solder Flange

PUMPS (Direct Wire to Control Panel)
2 CHUGGER WORT PUMP WITH CENTER INLET STAINLESS HEAD
4 1/2" SS Camlock F style fitting Quick Disconnect
2 Stainless Ball Valve - 1/2" FPT Full Port
2 Stainless steel coupler 3/4" FPT x 1/2" FPT

HOSES
2 2ft length - High temperature food-grade silicone tubing (1/2" ID 3/4" OD)
3 5ft length - High temperature food-grade silicone tubing (1/2" ID 3/4" OD)

CONTROL BOX
1 16x16x8" Enclosure
2 40 amp SSR 3-32VDC input voltage, 90-480VAC output voltage
3 PID temperature controller, 1/16 DIN size, SSR output, 85-264VAC supply
1 MULTIFUNCTION TIMER, COUNTER, TACHOMETER
1 3 digit blue LED digital panel volt meter 700V AC, 5V DC supply 1 3 digit blue LED digital panel amp meter
1 Blue 22mm LED pilot light
1 Red 22mm LED pilot light
2 Green 22mm LED pilot light
2 Yellow 22mm LED pilot light
1 22mm buzzer, 115-120V AC/DC
6 2 position maintained selector switch
1 2 position maintained selector switch with key
1 3 position maintained selector switch
1 22mm red pushbutton, momentary
3 Contactor, 2 pole 40 A, 120V Coil
1 7A 250V fast blow glass fuse (4 extras included)
1 10A 8-pin 2-pole ice cube plug-in relay with 110-120VAC coil (8-pin relay socket)
1 Eaton D3PA2 Socket, Octal, 8 Pin

TOOLS

1 Pull-through Tool(included) https://www.brewhardware.com/product_p/ptbulkhead_tool.htm


Questions please contact me, no trades, cash only or Paypal.

FULL Gallery or Images



DSC_2957_1.jpg
 Description:
 Filesize:  248.22 KB
 Viewed:  10346 Time(s)

DSC_2957_1.jpg




Last edited by loresonde on Thu Aug 16, 2018 7:31 pm; edited 2 times in total
Back to top
loresonde




Joined: 22 Feb 2017
Posts: 7



PostLink    Posted: Tue Sep 12, 2017 11:51 am    Post subject: Reply with quote

This is a 30amp setup and price is or best offer.
Back to top
Bluegil422




Joined: 06 Aug 2017
Posts: 5
Location: Portland, OR


PostLink    Posted: Tue Oct 24, 2017 7:01 pm    Post subject: Reply with quote

Checking if this is still available? And if you would be willing to help box it up for shipment? Thanks.
Back to top
loresonde




Joined: 22 Feb 2017
Posts: 7



PostLink    Posted: Tue Oct 24, 2017 10:01 pm    Post subject: Reply with quote

Bluegil422 wrote:
Checking if this is still available? And if you would be willing to help box it up for shipment? Thanks.


It is still for sale, I'm willing to box up(obviously the stand doesn't make sense to ship). It's going to get pretty pricey though, but that is up to you and we can work it out.
Back to top
bustgher




Joined: 11 Jan 2018
Posts: 1



PostLink    Posted: Sat Jan 13, 2018 7:30 am    Post subject: Reply with quote

Nice design and stand too.
Back to top
loresonde




Joined: 22 Feb 2017
Posts: 7



PostLink    Posted: Thu Aug 16, 2018 7:38 pm    Post subject: Reply with quote

This is still for sale and is not boxed up in storage. 2800+Shipping


IMG_0287.jpg
 Description:

Download
 Filename:  IMG_0287.jpg
 Filesize:  272.93 KB
 Downloaded:  498 Time(s)

Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Buy & Sell All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum



Forum powered by phpBB © phpBB Group