View previous topic :: View next topic |
Author |
Message |
Dandy
Joined: 06 Nov 2017 Posts: 3 Location: Westcliffe, CO
|
Link Posted: Wed Aug 15, 2018 5:55 pm Post subject: Wire ferrule crimper |
|
|
I'm getting the materials and tools together to start my control panel build and came across the wire ferrules on the new parts shopping site recently launched.
I'm somewhat new to these end connectors. I did some research and will definitely use them for my screw terminals on contactors, etc.
In researching crimping tools, there are many out there at widely varying price points. Does anybody have a recommendation for a decent ferrule crimper that will do up through 10 ga. single and double wire ferrules without breaking the bank?
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11116 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
Dandy
Joined: 06 Nov 2017 Posts: 3 Location: Westcliffe, CO
|
Link Posted: Thu Aug 16, 2018 6:17 pm Post subject: |
|
|
Thanks Kal.
I did some research last night and found a tool with interchangeable jaws at ferrulesdirect.com that will crimp single wire ferrules from 26 ga through 6 ga in two jaw sets and double wire crimps through 10 ga.
http://www.ferrulesdirect.com/terminal/SNAPNCRIMPTOOLS/QC1A.htm
|
|
Back to top |
|
|
|
|