View previous topic :: View next topic |
Author |
Message |
general_jah
Joined: 05 Jun 2017 Posts: 21 Location: Austin, TX
|
Link Posted: Wed May 02, 2018 11:00 pm Post subject: what would cause the control panel to suddenly not power up? |
|
|
Hey guys I have a question.
In the middle of a brew day and all of a sudden during my upper sach rest the control panel powered down and I cannot get it back on. I have reset the GFI outlet that it runs on and tested the 120V outlets on it as well. Seems to be good. I haven't tested the actual 240v yet since I don't have a multimeter. Guess I'll need to go to home depot and buy one to test the outlet.
I've reset the breaker box switches the electrician I hired to do the work installed, still cannot get it to power up.
Is there anything on the control panel itself that could have tripped?
I did have an accident with quite a bit of water getting onto my brew table so that could have caused it, but definitely didn't trip it right away, would have been hours later.
Any ideas on what I could troubleshoot would be appreciated.
Last edited by general_jah on Wed May 02, 2018 11:12 pm; edited 1 time in total
|
|
Back to top |
|
|
cmkopp11
Joined: 26 Jan 2018 Posts: 19 Location: San Diego
|
Link Posted: Wed May 02, 2018 11:02 pm Post subject: |
|
|
Check your switch lineup. Make sure the element select is to off and both pumps are off.
|
|
Back to top |
|
|
general_jah
Joined: 05 Jun 2017 Posts: 21 Location: Austin, TX
|
Link Posted: Wed May 02, 2018 11:12 pm Post subject: |
|
|
ah yea when i turned the pumps off, it allowed me to power it back up, thank you!
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
|
|