Ultimate Sparge Arm Sale!

[kal]

For The Next 24 Hours Get The MoreBeer! Ultimate Sparge Arm At 10% Off!
(Offer Expires 07/20/17)

The Ultimate Sparge Arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system.

This item also qualifies for FREE SHIPPING!

Features:
100% stainless and silicone construction
Two adjustment knobs make it extremely universal
Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
Included check ball will prevent back flow
Can adjust from the top of your kettle to 12-13 inches down into your kettle
A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
Can be mounted on a lip that is up to 7/8" wide
Has a 1/2" FPT ball valve

Be sure to enter Promo Code: SPARGEIT at checkout to save!

See: https://www.morebeer.com/products/ultimate-sparge-arm.html?a_aid=theelectricbrewery

Using our links helps support our site at no additional cost to you - we thank you!

Kal

[kal]

For The Next 24 Hours Get The MoreBeer! Ultimate Sparge Arm At 10% Off!
(Offer Expires 07/20/17)

The Ultimate Sparge Arm design is the perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system.

This item also qualifies for FREE SHIPPING!

Features:
100% stainless and silicone construction
Two adjustment knobs make it extremely universal
Included ball valve allows you to increase or decrease the flow rate during sparge or recirculation
Included check ball will prevent back flow
Can adjust from the top of your kettle to 12-13 inches down into your kettle
A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during recirculation
Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
Can be mounted on a lip that is up to 7/8" wide
Has a 1/2" FPT ball valve

Be sure to enter Promo Code: SPARGEIT at checkout to save!

See: https://www.morebeer.com/products/ultimate-sparge-arm.html?a_aid=theelectricbrewery

Using our links helps support our site at no additional cost to you - we thank you!

Kal