Return to TheElectricBrewery.com
  [ Shop ]   [ Building ]   [ Using ]   [ Recipes ]   [ Testimonials ]   [ Gallery ]   [ FAQ ]   [ About Us ]   [ Contact Us ]   [ Newsletter ]

Log inLog in   RegisterRegister   User Control PanelUser Control Panel   Private MessagesPrivate Messages   MembershipClub Memberships   SearchSearch   MemberlistMemberlist   Photo AlbumsPhoto Albums   Forum FAQForum FAQ


Engineering Help!

 
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Off-Topic
View previous topic :: View next topic  
Author Message
berzai@sbcglobal.net



Joined: 29 Mar 2011
Posts: 74
Location: Indiana


PostLink    Posted: Sun Feb 19, 2017 7:43 pm    Post subject: Engineering Help! Reply with quote


        Register to remove this ad. It's free!
You guys helped me in the past.. (http://www.theelectricbrewery.com/forum/viewtopic.php?t=26677&highlight=john+deere) along with CurtPalMe, I had come up with a very fast Power Wheels conversion. It is awesome, thank you.

Anyways, I got into a new problem that I am in need of some assistance. I think I have the basics in my mind, the biggest obstacle I'm hitting is the materials/hardware required. Anyways, here is a short youtube of the rig.

https://www.youtube.com/watch?v=MWDYlG7kuFk


What I want is this to be setup with a motor and not hand powered as it is now.

The cycle I want goes as such.

1. Press a foot pedal that turns a motor on which slowly to moderately pulls the cart to the very top of the ramp.
2. When the cart gets to the top, I want it to automatically release and barrel down the ramp via gravity. Basically unspool the line.

I have under $100 and can find parts for free pretty easily, craigslist searching, and have free time to do it.


The design I had in mind for the first round was to just use a cheap drill for the motor. Basically the way my table saw works, Ill have the motor drive a belt which in turn drives a pulley on the spool. The motor will be on a pivot point. When the pedal is pushed it engages a timer which sends current to an actuator which drives the motor away from the spool causing it to reel in the cord. When the timer is up, say I set it to 10 seconds, the actuator disengages the motor (basically pulls it closer to the spool), and the spool just allows gravity to pull on the cart making it fall back down.

The vbelt under tension applied from the actuator drives the spool, when no tension, just allows the 2 pulleys (1 from the motor, 1 on the spool) the spin freely, allowing the cart to travel back down the rails.

This is the idea. Simple and sturdy is king. The more mechanical and less electronic the better. Purely mechanical would be awesome, I'm not totally sold on the actuator. Where I'm stuck is the actual hardware. The cart weighs about 15 lbs, and is pretty sturdy. I need the rig to be sturdy as well because of the impact.

What type of pulleys/v belts would be good here. What type of foot pedal, timer, actuator that is strong enough but not $259. I'm pretty handy, but have no experience with programming etc, so an arduino is out. This is a simple rig, but it is literally driving me nuts trying to execute it. I don't want to buy a bunch of parts/motor either to not have them work.

Any thoughts would be incredibly helpful. In advance, you are awesome.
Back to top
kal
Forum Administrator


Joined: 12 Dec 2010
Posts: 10738
Location: Ottawa, Canada

Drinking: German Lager, Electric Creamsicle, London Pride, Kolsch, Belgian IPA, Red IPA, Russian Imperial Stout, Black Butte Porter

Working on: Weizen, Belgian Quad, Wit, English Pub Ale, Electric Creamsicle


PostLink    Posted: Tue Feb 21, 2017 10:28 pm    Post subject: Reply with quote

Did you ask this over at the CurtPalme.com forum as well? (I don't remember seeing it). Lots of engineering types there that can probably lend a hand.

I'd post this in the off-topic area: http://www.curtpalme.com/forum/viewforum.php?f=7

Good luck!

Kal

_________________
Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Back to top
View user's photo album (21 photos)
berzai@sbcglobal.net



Joined: 29 Mar 2011
Posts: 74
Location: Indiana


PostLink    Posted: Wed Mar 01, 2017 3:22 pm    Post subject: Solved Reply with quote

Case closed!

Thanks for viewing...
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Off-Topic All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Support our site by purchasing through this link. We thank you!

Forum powered by phpBB © phpBB Group