View previous topic :: View next topic |
Author |
Message |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Tue Jan 10, 2017 12:08 am Post subject: |
|
|
Great write up Kal, I will definitely brew this one soon thanks to your recipe. I saw the article in BYO also and their recipe. You did your homework on this one. Podcast with the brewer with tips and more accurate recipe, which is "considered to be cloned" is the one I will attempt to brew. Thanks again for your efforts!
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Jan 10, 2017 2:44 am Post subject: |
|
|
Thanks John! This is one I had heard lots of over the years so it's been on the "to-brew" list forever... The BYO mag article actually reminded me it's time to get brewing this one (and the fact that I was getting close to needing to fill one of my nitro taps...)
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
David_H
Joined: 13 Nov 2013 Posts: 139 Location: Savannah, GA
Drinking: Dry Irish Stout, Electric Pale Ale, American Amber Ale, Irish Red Ale
|
Link Posted: Wed Jan 11, 2017 1:16 pm Post subject: |
|
|
I brewed this over the past weekend. It's been in the Fermenter for 3 1/2 days. I will be adding Vanilla Beans to make a Vanilla Porter. I was planning on using WY1187 Ringwood, but my stored supply would not grow. I used US-05 as a backup. I will be adding the Vanilla Beans in secondary for 2-3 weeks. I'll let you know how it taste.
_________________ David
Kal Clone Controller
20 gallon Spike Brewing 3-Kettle System
SS Brewtech 14 gallon fermenter w/ gycol chiller
4 tap keezer with Nitro Tap
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Mon Jan 16, 2017 10:35 pm Post subject: |
|
|
kal, how important do you feel the 130 degree protein rest is, given the overall grain bill?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Jan 16, 2017 11:05 pm Post subject: |
|
|
itsnotrequired wrote: | kal, how important do you feel the 130 degree protein rest is, given the overall grain bill? |
Not very. I only include it because it's in the original, and did it because it's easy to do on my setup. If you can't, don't worry about it and just the single infusion mash at 156F.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Tue Jan 17, 2017 4:41 pm Post subject: |
|
|
kal wrote: | itsnotrequired wrote: | kal, how important do you feel the 130 degree protein rest is, given the overall grain bill? |
Not very. I only include it because it's in the original, and did it because it's easy to do on my setup. If you can't, don't worry about it and just the single infusion mash at 156F.
Kal |
i can easily do it on my setup but my final gravity numbers are way off. at a 156 mash, beersmith is estimating a 1.020 final gravity. i need to lower the mash to 151 to hit 1.016. seems odd, the numbers calc out fine on all the other recipes of your i have tried. thoughts on mashing at 151 vs 156? seems like i would lose body.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Jan 17, 2017 5:05 pm Post subject: |
|
|
itsnotrequired wrote: | at a 156 mash, beersmith is estimating a 1.020 final gravity. |
I would ignore any such estimates. No software looks at the yeast (you enter the attenuation yourself) nor does it look at the grist. Did you put in the 73% attenuation value?
Quote: | thoughts on mashing at 151 vs 156? seems like i would lose body. |
I would mash at whatever on your setup you think will hit the final gravity. Sorry for being so vague, but without knowing your setup, it's hard to comment.
For what it's worth, I find that yeast and grist have a much bigger impact than mash temp.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Tue Jan 17, 2017 5:24 pm Post subject: |
|
|
kal wrote: | isn't apparent attenuation a function of og and fg? |
They are all connected. FG is a function of the OG and attenuation.
OG comes from the sugars - that one's pretty simple, but even that can vary depending on the max grain yield (which can vary by brand/maltster/batch).
Attenuation is a function of lots of different things which are the hardest to 'calculate' ahead of time:
- Yeast strain / amount pitched / temp / etc
- Grist (how much fermentables vs unfermentables - this one's really complex)
- System behaviour
- Probably lots of other things that aren't coming to mind right now.
FG is really not something you can reliably calculate. It's most definitely one of the biggest unknowns.
In my software (Beer Tools Pro) I can enter the attenuation, but I generally ignore it for the reasons stated above. Until you brew a specific batch you're just guessing. I'm surprised you can't enter it as there's really very little way for the software to try and figure it out for you. As you get more brews under your belt you can start to "eyeball" where things will end up, especially once you've used a yeast strain a lot. Eventually you'll be able to guestimate attenuation pretty closely by looking at yeast strain, grist composition, and mash temp (in that order). You'll probably get within a point or two of where you wanted to be, and then can tweak the grist composition and/or mash temp for next time.
Software just can't do this. It's waaay too complex. Software doesn't even do the simplest things. For example, I bet if you put in 10 lbs of continental 2-row (mostly fermentable sugars) vs 10 lbs of carapils (mostly unfermentable sugars) into your software, it isn't going to change the FG on you even though it should change it greatly.
One of the best things I find brewers can do is to is ignore any software based attenuation calculations.
Quote: | wyeast states 1968 has an attenuation of 67-71%, can you even get to 73% with that strain? |
Yes.
Add "manufacturer yeast strain attenuations" to the list of things that brewers should also ignore. They're a bit useful when comparing strains against each other but for the most I find them absolutely useless.
For example, I've gone as high as 83.5% attenuation on my Firestone Walker Double Jack clone: http://www.theelectricbrewery.com/forum/viewtopic.php?t=27614
Kal
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
701pilot
Joined: 10 May 2016 Posts: 50 Location: northern california
Drinking: Bohemian Pilsner,Caribou Slobber, Munich Helles, Weissbier, Black Bute Porter, RIS, Irish Red Ale
Working on: Milk Chocolate Stout
|
Link Posted: Tue Jan 17, 2017 6:07 pm Post subject: |
|
|
Itsnotrequired
I brewed this ten days ago. Just went out and checked the gravity. It started out at 1.059 and is at 1.011 now.
I also use Beer Smith with the same 1.020 estimate, at 64.6% attenuation estimate. What I have is 1.011 with an attenuation of 82.2%.
The fermentation really took off on day two and ended up at 71 deg. I ferment in a cool building and had a heat pad set for 64 deg. I caught it and cooled it down to 64 deg. I don't know if that effected the outcome of the low gravity or not. But you can certainly achieve a higher attenuation than what the yeast specs say.
_________________ Mark
I can't change the laws of physics but with enough horse power I can chase it into submission.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Jan 17, 2017 6:12 pm Post subject: |
|
|
Yup. If you find yourself consistently ending up with a dryer (more attenuated) beer than planned, up the mash temp and/or swap out some of the base (low lovibond) malt for carapils.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
itsnotrequired
Joined: 15 Sep 2015 Posts: 177 Location: central wi
|
Link Posted: Tue Jan 17, 2017 7:09 pm Post subject: |
|
|
701, good to hear! that's some pretty gnarly attenuation. i've only used 1968 a couple times before, both after just starting my system, still learning it. i'll go with the 156 mash and see what happens.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Tue Feb 07, 2017 2:47 am Post subject: |
|
|
Might be a little early but anyone taste their batches yet? Wondering how you like the finished product.
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Feb 07, 2017 3:11 am Post subject: |
|
|
Mine's great! Actually enjoying a pint of it as I type this. That said, I don't post any recipe until I've confirmed it's perfect and I like it.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Last edited by kal on Wed Oct 23, 2019 7:22 pm; edited 1 time in total
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Tue Feb 07, 2017 11:27 pm Post subject: |
|
|
kal wrote: | Mine's great! Actually enjoying a pint of it as I type this.
Kal |
Ok cool, as this one is on my "to brew list" and is on deck after I brew my Irish Red this week for St. Patty's Day!
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tennessee
Joined: 04 Apr 2015 Posts: 116 Location: Tennessee
|
Link Posted: Sun Feb 19, 2017 4:59 pm Post subject: |
|
|
@ 1.014 on day 8. Time to crash! Already tastes scrumpdillyicious
_________________ Kal Clone (30amp),Mash Re-Circulation Manifold, Custom BK Hop Filter.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
701pilot
Joined: 10 May 2016 Posts: 50 Location: northern california
Drinking: Bohemian Pilsner,Caribou Slobber, Munich Helles, Weissbier, Black Bute Porter, RIS, Irish Red Ale
Working on: Milk Chocolate Stout
|
Link Posted: Sun Feb 19, 2017 8:17 pm Post subject: |
|
|
Just bottled mine this morning. Real mild, this is one you could drink a lot of. Let's see..... that is fill one drink one. Right?
_________________ Mark
I can't change the laws of physics but with enough horse power I can chase it into submission.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Sat Jul 15, 2017 12:30 am Post subject: |
|
|
Hello all, well everyone around here has had me brew what they wanted lately (I guess that's a compliment) so I took care of them over the past few months and put this one on the back burner......Until today! Brew day went smooth as could be (again Kal your control box is just a dream to use) and I hit my pre boil numbers but I came in a little hot on the post boil at 1.062, so we will see what the yeast does (had a 2.5 liter starter), so I may have made a little stronger beer, got really good efficiency on this one. I will report back when I get it on tap. Beautiful wort color on this one as it went into the fermentor and also in the hydro flask already!
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jcav
Joined: 21 Sep 2011 Posts: 205 Location: Central Florida
|
Link Posted: Mon Aug 14, 2017 1:07 am Post subject: |
|
|
So I put this one on tap today and we all pulled several pints. This is a great recipe and I really like this beer! I managed to get my hands on a real Black Butte Porter a few weeks ago when we took a trip up north and I have to say this recipe is definitely spot on! Thanks for posting Kal! Another beauty!
John
_________________ "Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|