Return to TheElectricBrewery.com
  [ Shop ]   [ Building ]   [ Using ]   [ Recipes ]   [ Testimonials ]   [ Gallery ]   [ FAQ ]   [ About Us ]   [ Contact Us ]   [ Newsletter ]

Log inLog in   RegisterRegister   User Control PanelUser Control Panel   Private MessagesPrivate Messages   MembershipClub Memberships   SearchSearch   MemberlistMemberlist   Photo AlbumsPhoto Albums   Forum FAQForum FAQ


Codemazters electric brewery "Optimistbryggeriet"

 
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Building Your Brewery
View previous topic :: View next topic  
Author Message
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Tue Apr 05, 2016 10:24 am    Post subject: Codemazters electric brewery "Optimistbryggeriet" Reply with quote


        Register to remove this ad. It's free!
Hi!
First of all I just want to say thanks for an exelent page.

I have been drooling over this page for a long time (3 years) and the plans for building my own have grown into finally happening.

I bought the kettles used from a fellow Norwegian that wanted to downsize his electric brewery.

I have been sourcing most of my parts from ebay, and tried to atleast follow Kal`s links to get there even if I haven't bougth exactly the parts listed.

I`m going to use DIN rails and without the voltage and current indicators.

I`m going to update this page as building continues

Image: Front door finally with all holes, signs just testfitted, several must have a remake because my friend that made them didnt know that i wanted two lines for all "off - xxx - on" signs.



My little space in the corner of the washing room. here I will make a new bench, and ad a ventilation hood.
On the wall oposite of the bench I hope to have room for 2 fridges. for fermentation and bottles/kegs
Back to top
kal
Forum Administrator


Joined: 12 Dec 2010
Posts: 10151
Location: Ottawa, Canada

Drinking: German Lager, Electric Hop Candy Jr, Scottish 70/-, Cali Common, Maibock, Helles, Russian Imperial Stout, Black Butte Porter

Working on: Weizen


PostLink    Posted: Tue Apr 05, 2016 11:50 am    Post subject: Reply with quote

Good luck with your build and welcome to the forum! I'm glad to hear you've found the website helpful!

I look forward to reading about progress.

Kal

_________________
Our new shop with over 150 new products: shop.TheElectricBrewery.com
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Back to top
View user's photo album (21 photos)
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Tue Apr 05, 2016 8:47 pm    Post subject: Reply with quote

some progress today.

Wired up most of the stuff thats mounted in the door.
I work offshore at an oilrig, so I just brought the door and the components that i needed to make the holes in it. (the cabinet was a bit heavy for the bag).


my office is a mess now, but that doesnt matter... I got a lot done today Very Happy




Since I don`t have the cabinet or the components that goes in there with me, I thought that I just made the wires long enough to fit them when i mount the door to the rest of the cabinet.




Still some work left, but I`m getting there
Back to top
jcav



Joined: 21 Sep 2011
Posts: 182
Location: Central Florida


PostLink    Posted: Wed Apr 06, 2016 11:01 pm    Post subject: Reply with quote

That's great, good luck with the rest of the build!

John

_________________
"Perfection is unobtainable, but if you chase perfection you can catch excellence"- Vince Lombardi
Back to top
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Thu Apr 07, 2016 6:13 am    Post subject: Reply with quote

thanks guys!
It will take a while before all the parts arrive, /some as late as end of may) also there is a lot of other stuff happening in my life, so please do not sit on the edge of your chair waiting for updates. Have a little hope on beeing finnished around july, but I guess we will se when that time comes.
Back to top
Tennessee



Joined: 04 Apr 2015
Posts: 112
Location: Tennessee


PostLink    Posted: Thu Apr 07, 2016 6:58 pm    Post subject: Reply with quote

Codemazter wrote:
thanks guys!
It will take a while before all the parts arrive, /some as late as end of may) also there is a lot of other stuff happening in my life, so please do not sit on the edge of your chair waiting for updates. Have a little hope on beeing finnished around july, but I guess we will se when that time comes.



Getting there is half the fun! GL

_________________
Kal Clone (30amp),Mash Re-Circulation Manifold, Custom BK Hop Filter.
Back to top
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Sat Apr 09, 2016 8:42 am    Post subject: Reply with quote

Modified the drawing from JohnnyGunn that I found on this thread: http://www.theelectricbrewery.com/forum/viewtopic.php?t=26248&start=0&postdays=0&postorder=asc&highlight=visio to fit my build.

Where I live we have 230V TN system, so this drawing is adapted for that, and it also uses the Sestos PID`s and Timer.

Thanks for the inspiration Smile



Optimistbryggeriet arbeidstegning.vsd
 Description:
My Visio

Download
 Filename:  Optimistbryggeriet arbeidstegning.vsd
 Filesize:  305.5 KB
 Downloaded:  216 Time(s)

Back to top
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Mon Jun 27, 2016 4:27 pm    Post subject: Reply with quote

Back to scratch.... My significant other and I are splitting up.... need to sell the house and find a smaller place, kettles and panel are stoved away in a storage container....
Looking for a place with potential for having a permanent place for the brewery Wink
Back to top
Codemazter



Joined: 05 Apr 2016
Posts: 7
Location: Norway


PostLink    Posted: Fri May 03, 2019 10:45 am    Post subject: Reply with quote

New house new possibilities, new brewing room in the basement is almost complete.
the controlpanel is wired up, and I`m almost ready to go.

this is going to be the best summer Smile



IMG_9901-min.JPG
 Description:

Download
 Filename:  IMG_9901-min.JPG
 Filesize:  265.28 KB
 Downloaded:  95 Time(s)


IMG_9888-min (1).JPG
 Description:

Download
 Filename:  IMG_9888-min (1).JPG
 Filesize:  273.18 KB
 Downloaded:  94 Time(s)

Back to top
kal
Forum Administrator


Joined: 12 Dec 2010
Posts: 10151
Location: Ottawa, Canada

Drinking: German Lager, Electric Hop Candy Jr, Scottish 70/-, Cali Common, Maibock, Helles, Russian Imperial Stout, Black Butte Porter

Working on: Weizen


PostLink    Posted: Sun May 05, 2019 2:34 am    Post subject: Reply with quote

Looks great so far! Well done!

Kal

_________________
Our new shop with over 150 new products: shop.TheElectricBrewery.com
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
Back to top
View user's photo album (21 photos)
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    TheElectricBrewery.com Forum Index -> Building Your Brewery All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Support our site by purchasing through this link. We thank you!

Forum powered by phpBB © phpBB Group