|
|
|
|
|
View previous topic :: View next topic |
Author |
Message |
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Sun Nov 15, 2015 2:43 pm Post subject: |
|
|
Got Windows 10 installed along with the latest Nvidia drivers and did some burn-in tests/benchmarking.
Seems the Cooler Master Hyper 212 EVO cpu cooler is defective. The copper heat pipes in it aren't even warm when I run things like the Intel Stress Test tool:
https://downloadcenter.intel.com/download/24075/Intel-Extreme-Tuning-Utility-Intel-XTU-
I'm seeing 70C+ CPU temps. This is all without a case, everything running stock speeds (no overclocking), including the i1 4790K CPU at the stock 4.0Ghz speed.
By comparison the heat pipes in the GTX 970 get almost too hot to touch when running GPU tests and benchmarks like Valley Benchmark ( https://unigine.com/products/benchmarks/valley/ )
Going to try the Intel stock CPU heat sink for comparison, but may have to return the Cooler Master Hyper 212 EVO cpu cooler. Weird. I thought these things were completely passive, but Googling shows at least few other people with similar issues that were solved by swapping out the cooler.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Sun Nov 15, 2015 10:11 pm Post subject: |
|
|
Well I did some more testing about the 4x core temperatures and under load I'm hitting the "Tj Max" (Tjunction Max) temp of 100C immediately. This is the Core temperature at which the processor will Throttle (reduce clock speed) to protect against thermal damage.
Reminder that this is an Intel i1 4790K with a regular speed of 4000Mhz and a Turbo speed of 4400Mhz. I'm running everything stock. No overclocking or changes of any sort. Ambient temp was ~20C, motherboard's not in a case so lots of airflow.
Tests:
Quote: | Cooler Master 212 EVO CPU fan:
Idle: All 4 cores at ~30C
Under load: All 4 cores hit 95-100C immediately when starting test.
Core clocks ran full tilt at 4400 Mhz (Turbo) so there was no throttling at all.
After 10 mins the heat sink was cool, the heat pipes near the bottom were just very slightly warm.
Stock Intel heatsink/fan:
Idle: All 4 cores at ~30C
Under load: All 4 cores hit 95-100C immediately when starting test.
Core clocks were throttled back to 3700-3900Mhz so it would appear the stock heatsink/fan doesn't work as well as the EVO 212.
After 10 mins the heat sink was warm. |
In both cases this is way too hot, no? From what I've read, I don't like that it's going over 80C. If you shouldn't be going over 80C for a stock setup, is it acceptable to return a CPU? Can it be considered "defective"? Maybe there's a gap between the IHS (integrated heat spreader) which is the part the heat sink presses against on the outside of the CPU And the die inside? Which is why many people seem to delid CPUs. Examples:
http://www.overclock.net/t/1309867/short-and-direct-delid-guide-ivy-bridge
http://www.overclock.net/t/1313179/official-delidded-club-guide
Or maybe it's a mobo issue?
--------- MORE INFO / HOW MY TESTS WERE DONE --------------
Referring to: http://www.tomshardware.com/forum/id-1800828/intel-temperature-guide.html
They say that the normal operating range for Core temperature:
80C Hot (100% Load)
75C Warm
70C Warm (Heavy Load)
60C Norm
50C Norm (Medium Load)
40C Norm
30C Cool (Idle)
My specific CPU:
4th Generation 22 nanometer: i7 4790K (TDP 88W / Idle 2W)
Tcase (CPU temp) = 74C
Tjunction (Core temp) = 79C
Tj Max (Throttle temp) = 100C
(So with both fans I'm hitting Tj Max which isn't good at all).
Apps used to measure the temps were Realtemp 3.70, CPUID HWMonitor, CoreTemp 1.0 RC5. All 3 more or less show the same temp values.
To load the CPU cores I ran the "Small FFT" test in Prime95 v28.7 64 bit - a well known tool for this.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
Tennessee
Joined: 04 Apr 2015 Posts: 116 Location: Tennessee
|
Link Posted: Mon Nov 16, 2015 1:33 am Post subject: |
|
|
Install "MSI Command Center" and compare the temp readings too what your seeing. Your defiantly running too hot!
_________________ Kal Clone (30amp),Mash Re-Circulation Manifold, Custom BK Hop Filter.
|
|
Back to top |
|
|
Fal
Joined: 29 Dec 2014 Posts: 70
|
Link Posted: Mon Nov 16, 2015 3:06 am Post subject: |
|
|
Yes. That is too hot. Anything 100F is dangerous to the CPU. GPUs are a little tougher. Either way, the only time I've had a similar problem was when the cooler was mounted poorly/improperly. What kind of thermal paste are you using? Can you remove all parts of the mount and start over with fresh paste? With the coolmaster, I would expect your temperatures to stay below 60F.
|
|
Back to top |
|
|
Tennessee
Joined: 04 Apr 2015 Posts: 116 Location: Tennessee
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Nov 16, 2015 9:19 pm Post subject: |
|
|
Solve it.
Answer here, straight from Intel: https://communities.intel.com/docs/DOC-23517
Basically I used their XTU tool mentioned in that post and played with what power the CPU's allowed to work with when pushed. My CPU's rated to 88W so that's what I need to make sure it gets (max). Now the temps peak around 70C with this insanely demanding Prime95 app, or in the mid 60C's for anything else when I push the machine hard. 70C or under is perfect. Did some benchmarks and the machine's stil rating the same or even slightly better as it's not thermal throttling.
The values I played with are "Turbo Boost Power Max" (was 512W, I set it to 88W per my CPU's max wattage) and "Turbo Boost Short Power Max" (It was set to 512W, I set to 110W with a max of 16 seconds) and "Processor Current Limit" (was 256A, I set it to 105A)
I don't know exactly how these settings in this Intel XTU tool actually change my BIOS settings temporarily while in Windows (or I think that's how it works) or what values it uses but everything runs well now so I don't care. Looking through the BIOS settings I didn't see anything similar that allowed me to set wattage or amps directly in this MSI Z97 Gaming 5 motherboard.
Incidentally, if you download Prime 95 and run it while Realtemp 3.70 is running to show your core temps, I think most of you will be surprised how HIGH your core temps get. I've tried it on two other machines (including this i7-4700HQ laptop I'm using right now) and the same thing happens: My core temps go up to near 100C almost instantaneously. I would bet that most machines out there would do the same, but people just don't realize it.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
Tennessee
Joined: 04 Apr 2015 Posts: 116 Location: Tennessee
|
Link Posted: Tue Nov 17, 2015 11:48 am Post subject: |
|
|
Glad you figured it out! Not sure why those numbers where defaulted so high!
My numbers are a little higher
Clock 100.00 Mhz
Core Voltage 1.185v
TBSPM 255w
TBPM 255w
TBPTW 16 Sec.
Current Limit 256A
Voltage Offset 0mv
44X multiplier
Prime 95 maxed out all cores to 98/100C
_________________ Kal Clone (30amp),Mash Re-Circulation Manifold, Custom BK Hop Filter.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11122 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Tue Nov 17, 2015 1:42 pm Post subject: |
|
|
Tennessee wrote: | Glad you figured it out! Not sure why those numbers where defaulted so high!
My numbers are a little higher
Clock 100.00 Mhz
Core Voltage 1.185v
TBSPM 255w
TBPM 255w
TBPTW 16 Sec.
Current Limit 256A
Voltage Offset 0mv
44X multiplier
Prime 95 maxed out all cores to 98/100C |
If I enabled the overclocking features in my motherboard's BIOS the values you list above are the defaults for me as well which also maxes out all cores to near 100C when running Prime 95. Other heavy CPU apps make it hit 85-95C. Both are too high so I lowered the numbers to:
TBSPM 110w
TBPM 88w
TBPTW 8 Sec.
Current Limit 105A
This way the CPU never gets much above 70F.
Without turning on the "overclocking" features in the BIOS I don't see these values directly (they're locked at "AUTO"). So now I don't need to use the Intel XTU tool to change them in Windows. Instead, they're set directly in the BIOS so that no matter what OS I run they're set pseudo-permanently. Much better.
Thanks for all the hints guys!
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Forum powered by phpBB © phpBB Group
|
|