View previous topic :: View next topic |
Author |
Message |
perogi
Joined: 12 Feb 2012 Posts: 850 Location: NH
Drinking: Perogi Pale, NEIPA, Nutter's Crossing Nut Brown Ale, Edmund Fitzgerald Porter Clone
Working on: Max's Maibock
|
Link Posted: Sun Mar 11, 2012 11:33 pm Post subject: |
|
|
+1 thank you for this!!
|
|
Back to top |
|
|
vedrosrp
Joined: 17 Jan 2013 Posts: 20 Location: Virginia Beach, VA
Drinking: Amber Ale, Bavarian Weizen, Oatmeal Stout
Working on: Dead Ringer IPA, Walking Dead IPA, Orange Wheat Saison
|
Link Posted: Mon Jan 21, 2013 7:40 pm Post subject: |
|
|
I actually wired up the Safe Start Interlock while I was initially wiring the main power relay. I tested the circuit before anything else was wired. All switches off = main relay comes on and blue light comes on. Any of the 3 switches turned on and the panel will not power up. When the panel was already on I was able to turn on any of the 3 switches and still maintain power to the panel.
I knew I was going to go the Safe Start Interlock route from the beginning so I just wired it up that way.
_________________ Libertas est non gratis - (ask a vet)
|
|
Back to top |
|
|
jamatron
Joined: 06 Jan 2013 Posts: 39 Location: Sherwood Park AB
|
Link Posted: Fri Feb 01, 2013 7:02 pm Post subject: |
|
|
you said that the output voltage on the doorbell transformer should read 120vac, i thought the output was supposed to be reduced to 12vac before it got to the dc pwr supply?
_________________ Whether you think you can or can't - you probally wont surprise yourself
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
jamatron
Joined: 06 Jan 2013 Posts: 39 Location: Sherwood Park AB
|
Link Posted: Fri Feb 01, 2013 9:19 pm Post subject: |
|
|
kal wrote: | Correct. Good catch. Thank you. I've fixed the text.
Kal |
whew! im just getting ready to start my wiring this weekend and thought i was ready then i read that . lol Btw tremendous job on the how - to on this site, there was no way i could have tackled a job like this with out it. Awesome site
_________________ Whether you think you can or can't - you probally wont surprise yourself
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Tue Feb 26, 2013 3:46 pm Post subject: |
|
|
Is there a link or sticky to a full schematic diagram for the different panels. ? Or would this be just use PJ's schematics.
_________________ My Brewery
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
sincere01
Joined: 16 Jun 2012 Posts: 162 Location: Gresham OR
|
Link Posted: Tue Feb 26, 2013 8:43 pm Post subject: |
|
|
kal wrote: |
Thanks! As long as the result is more beer in the world, my job here is done. Beer makes the world a happier place.
Kal |
There is definitely more beer at my house (and my friends houses) because of it!
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Thu Feb 28, 2013 6:08 pm Post subject: |
|
|
Any idea why when i go to turn on the safe start relay or main contractor I trip my main ground fault breaker.. Even if i unhook everything and just have the coil hooked up I trip it.. But have no problem running a 5500w heating element directly and running for hours..
Is it the coil surge on the contractors ?
_________________ My Brewery
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Thu Feb 28, 2013 7:33 pm Post subject: |
|
|
I rechecked all the wiring .. Replaced the ground fault with another breaker and all the functions work in the panel just fine..
I need to debug my Spa panel now.. maybe it is a faulty ground fault breaker.. eaton gfcb250 5mA sensitivity
_________________ My Brewery
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Thu Feb 28, 2013 10:42 pm Post subject: |
|
|
Want to check before hooking up meters ... I also having issues with a dc power supply.. Have not hooked up the output to DC side yet.. one supply adjusts just fine.. the other I turned the pot more then 30 times Clockwise and will not go down below 13.8vdc ..
_________________ My Brewery
|
|
Back to top |
|
|
sincere01
Joined: 16 Jun 2012 Posts: 162 Location: Gresham OR
|
Link Posted: Thu Feb 28, 2013 10:45 pm Post subject: |
|
|
Quote: | Have not hooked up the output to DC side yet.. one supply adjusts just fine.. the other I turned the pot more then 30 times Clockwise and will not go down below 13.8vdc . |
Did you source the parts yourself? If so, are you using doorbell transformers? If so, are you using the type that has variable voltage based on how you connect it? If the answers to all those questions are yes, you may want to check how the connections are and if you can re-wire them to a lower voltage on the transformer.
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Thu Feb 28, 2013 10:52 pm Post subject: |
|
|
sincere01 wrote: | Quote: | Have not hooked up the output to DC side yet.. one supply adjusts just fine.. the other I turned the pot more then 30 times Clockwise and will not go down below 13.8vdc . |
Did you source the parts yourself? If so, are you using doorbell transformers? If so, are you using the type that has variable voltage based on how you connect it? If the answers to all those questions are yes, you may want to check how the connections are and if you can re-wire them to a lower voltage on the transformer. |
All parts from b2b kit ..
i will check the incoming AC to the board next.. but the transformers are identical
|
|
Back to top |
|
|
sincere01
Joined: 16 Jun 2012 Posts: 162 Location: Gresham OR
|
Link Posted: Thu Feb 28, 2013 10:58 pm Post subject: |
|
|
kit? like you bought if from Kal and Mike?
|
|
Back to top |
|
|
TwoDogBrew
Joined: 05 Nov 2012 Posts: 13
|
Link Posted: Thu Feb 28, 2013 11:15 pm Post subject: |
|
|
sincere01 wrote: | kit? like you bought if from Kal and Mike? |
Yes.. bought the full B2B kit from Kal and Mike.. and a perfect kit I might add.. no issues except this one.. Took me two days to assemble.. I will put up pics later of the box it self.
BTW I am a EEE and past life designed and built industrial automation controls like this.. So knowledge is not the issue here.
https://plus.google.com/u/0/photos/108423930313055883312/albums/5837437514564241345
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11121 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Mon Sep 07, 2015 1:22 pm Post subject: |
|
|
Added a new hint:
Quote: | One of my switches works backwards! It's on when it should be off, and off when it should be on.
Switches use either NO or NC contactors (or both). Make sure to use the correct ones following our wiring guides. If you are sure the correct ones are being used, reverse the position on the switch. For example, if the switch has the correct contactor installed on the left side and the switch is working backwards, install the contactor on the right. Ignore the 1/2/3/4 numbers printed on the contactors. Contactors are not polarized (there is no in or out connection points) so it doesn't matter which side of the contactor is used when wiring.
|
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
|
|