|
|
|
|
|
View previous topic :: View next topic |
Author |
Message |
jphussey
Joined: 17 Oct 2012 Posts: 171
|
Link Posted: Wed Oct 17, 2012 5:29 pm Post subject: The Electric Brewery: Transportable? |
|
|
For Kal et. al,
Have any of you had to move your Electric Brewery? I imagine, just from thinking this through, the biggest PITA is the ventilation stuff. Having to move the hood and vents, etc.
Kal I think I read that you were in the process of relocating your brewery to a new home. Would be interested in any observations from you or others who have done this?
I move quite a bit and am weighing my options here. I guess I could go with some sort of 'on wheels' table and just use the electric brewery outside? Does the control panel just plug into a standard outlet on a 30A circuit?
Edit: found your brewery 2.0 post Kal.
Thanks,
Jason
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Wed Oct 17, 2012 6:24 pm Post subject: |
|
|
If you mean moveable as in take it somewhere else and brew there then it's not as portable as gas. You can't brew out in a field somewhere. Local brewers around here do get together once a year to brew and luckily the place we use as a few 30A and 50A outlets so that works. (Though I've missed it 2 years in a row now for various reasons... I always did intend to bring my setup and brew, borrowing a sturdy table was really all I needed).
If you mean moving houses then yes, the ventilation can be the biggest PITA, depending on how it's done. In my case my hood vent exhaused out the front since in my previous house I had a really low ceiling. In the new house I wanted to exhaust out the top so long story short, I ended having a new hood vent built. Everything else about the setup is staying the same since it work well. I have no desire to change anything.
The Standard Control Panel works off a 30A/240V dryer outlet. That's all you need. Brewing outdoors means no hood fan required. If you move a lot it just means you're moving 3 large kettles, a table, the control panel, and few other pieces. Really no different than moving the rest of the things in your house. The 30A outlet is the only issue. If you're near your clothes dryer, you can build an extension cord.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
jphussey
Joined: 17 Oct 2012 Posts: 171
|
Link Posted: Wed Oct 17, 2012 6:52 pm Post subject: |
|
|
Yea I meant moving houses mostly. So when you're brewing in your garage (or were), did you just open the doors and go hoodless? Did you put your brewstand on wheels? Or is that just elevated on rigid posts?
Thanks for all the quick replies - hope it wasn't all duplicate information! I'm reading through your post about your new build but some of these are LONG!
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 12 Dec 2010 Posts: 11123 Location: Ottawa, Canada
Drinking: Pub Ale, Electric Creamsicle, Mild, Pliny the Younger, Belgian Dark Strong, Weizen, Russian Imperial Stout, Black Butte Porter
|
Link Posted: Wed Oct 17, 2012 7:01 pm Post subject: |
|
|
jphussey wrote: | Yea I meant moving houses mostly. So when you're brewing in your garage (or were), did you just open the doors and go hoodless? |
Yup. I needed to use a fan blowing near the ceiling to avoid condensation forming on the ceiling. Otherwise I was fine.
Quote: | Did you put your brewstand on wheels? Or is that just elevated on rigid posts? |
No wheels. It was the same brew stand I have in my instructions. I have (had) no reason to wheel it around.
Quote: | Thanks for all the quick replies - hope it wasn't all duplicate information! I'm reading through your post about your new build but some of these are LONG! |
Yup, there's a lot of stuff in there. A real brain dump on my part, often for me to keep track of the decisions that were made. I find myself going back to stuff I wrote quite a bit as I have a memory like a sieve. I was mounting my control panel in the new brewery 2 nights ago and had to go back to my build instructions to remind myself how I did it the first time.
Kal
_________________ Our new shop with over 150 new products: shop.TheElectricBrewery.com
We ship worldwide and support our products and customers for life.
Purchasing through our affiliate links helps support our site at no extra cost to you. We thank you!
My basement/bar/brewery build 2.0
|
|
Back to top |
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Forum powered by phpBB © phpBB Group
|
|