View previous topic :: View next topic |
Author |
Message |
egabe
Joined: 19 Jan 2011 Posts: 4 Location: Colorado
|
Link Posted: Thu Jan 27, 2011 5:51 am Post subject: Copper HERMS Coil |
|
|
I'm planning out my clone of the e brewery and I am worried about my skills with coiling that stainless coil. I am considering using a copper coil and wanted to know if anyone else has done that and what additional(if any) parts were needed and how it worked out for you. Back to the stainless side what kind of machine shop would do coiling of stainless if I used them? I have emailed a couple near me and no one seems to do it. Thanks!
|
|
Back to top |
|
|
brewmcq
Joined: 31 Dec 2010 Posts: 123 Location: Northern Maine
|
Link Posted: Thu Jan 27, 2011 12:52 pm Post subject: |
|
|
I'm planning on using copper for pretty much everything... but not even remotely close to planning for my HERMS coil.
Quickly re-reading Kal's instructions on installing the HERMS, that's pretty much exactly how I'm going to do it, replacing the stainless coil for copper and all the SS fittings with brass.
|
|
Back to top |
|
|
|
|